Menu Bar
Layer
Bring to Front | T, Shift+F1 | Bring the selected layers to the front. |
---|---|---|
Bring Forward | U, Shift+F2 | Bring the selected layers forward. |
Send Backward | D, Shift+F3 | Send the selected layers backward. |
Send to Back | B, Shift+F4 | Send the selected layers to the back. |
Fit to Panel | Ctrl+T | Fit the selected layers to the size of the panel. |
Reset Size | Ctrl+R | Return the selected layers to the original size. |
Numerical Setting | N | Enter the number of position and size of the material, the angle of rotation directly. |
Flip Vertical | V | Flip the selected layers vertically. |
Flip Horizontal | H | Flip the selected layers horizontally. |
Rotate Left | L | Rotate the selected layers to the left. |
Rotate Right | R | Rotate the selected layers to the right. |
Fit to 90 degress | J | Fit the layer in 90 degree increments. |
Reset To Straight | Reset rotation of the selected layers. | |
Reset Aspect Ratio | Reset the aspect ratio of the selected layers layer. | |
Fixed Aspect Ratio | Lock the aspect ratio of the raw material data when increasing/decreasing the size. | |
Visible | Shows or hides the selected layers. | |
Draw Outside Panel | W | Allows the selected layers to show outside of the panel. |
Pop Out From Panel | Allows the selected layers to pop out from the panel. | |
Filter | F | Apply a filter to the selected layers. |
Change Color | C | Apply color effect to the selected layers. |